S.N.	Description	Rate	Remarks
1	Residential building (Building area upto 5000 sq.ft. and plint area does not exceed 1500 sq.ft.)	12
2	Residential building (Building area more than 5000 sq.ft. and plint area exceed 1500 sq.ft.)	30
3	Commercial building /Residential cum Commercial	35
4	Building in Old Urban areas	5
5	Any building in commercial sub-zone	35
6	Apartment/ group housing/institutional/school/hospital	35
7	Boundary walls (in any areas)	12

Discount of Building Permit Charge

1. Metropolitan Staff Discount (discount all taxes).

2. Municipal Discount (Discount all taxes but it should be decided by Municipal Board).

3. Earthquake Victims discount

• Up to areas 3000 sq.ft consisting of building and boundary wall.
• For building areas greater than 3000 sq. ft. discount first boundary wall and then building upto 3000 and apply building rate for other areas.

At the time of sarjmin pratiwedan by field Engineer

If floor data, site plan area and row revision is applied then client have to follow as below.

1. If floor data changes and the building area decreased or same as previous floor data, then we have to take

• Revision tax @1 per sq.ft of revised floor data.

2. If floor data changes and the building area increased as compared to previous floor data we have to take

• Revision tax @1 per.sq.ft of revised floor data.
• Addition tax @building rate as shown in above table for the increased floor area only.

3. If the building is constructed at the time of sarjmin then following tax should apply.

• If the building is constructed at sarjmin up to DPC, then fine only decided by mayor should be applied.
• If the building is constructed above DPC at sarjmin, then fine and addition tax should be done as per constructed floors. If one story is constructed then addition tax @2 times building tax as shown in above table and fine decided by mayor should apply for one floor. If two stories are constructed then addition tax@2 times building tax as shown in above table and fine decided by mayor should apply for two floors and so on.

 

At the time of DPC check by Field Engineer

If floor data, site plan area and row revision is applied then client have to follow as below.

1. If floor data changes and the building area decreased or same as previous floor data, then we have to take

• Revision tax @1 per sq.ft of revised floor data.

2. If floor data changes and the building area increased as compared to previous floor data we have to take following tax.

• Revision tax @1 per.sq.ft of revised floor data.
• Addition tax @building rate as shown in above table for the increased floor area only.

3. If the building is constructed at the time of DPC Check then following tax should apply.

• If the building is constructed at DPC Check up to DPC, then no fine and no addition tax should be applied.
• If the building is constructed above DPC at DPC Check, then fine and addition tax should be done as per constructed floors. If one story is constructed then addition tax @2 times building tax as shown in above table and fine decided by mayor should apply for one floor. If two stories are constructed then addition tax@2 times building tax as shown above in table and fine decided by mayor should apply for two floors and so on.

At the time of Completion Check by field desk

1. If the constructed area of building is decreased than approved building area, then we have to take

• Revision tax @1 per sq.ft of constructed floor data.
• Completion tax @1 per sq.ft of constructed floor data.

2. If the constructed area of building same as approved areas, then we have to take

• Completion tax @1 per sq.ft of constructed floor data.

3. If the constructed area of building is increased than approved building area, then we have to take

• Revision tax @1 per sq.ft of constructed floor data.
• Completion tax @1 per sq.ft of constructed floor data.
• Addition tax @3 times building tax as shown in above table.
• Fine decided by mayor.